Voyager and Galileo Images of Ganymede, The Ganymede images and mosaics thread |
Voyager and Galileo Images of Ganymede, The Ganymede images and mosaics thread |
Jun 9 2016, 06:12 PM
Post
#106
|
|||
IMG to PNG GOD Group: Moderator Posts: 2257 Joined: 19-February 04 From: Near fire and ice Member No.: 38 |
Awesome mosaics. The huge global mosaic is probably a bit distorted though but is a great overview of Ganymede's anti-Jupiter hemisphere. It's easy to see from these mosaics that the Voyager 2 Ganymede coverage is really good and the data quality is much higher than in the Voyager 1 data set (in particular there are no smeared images). The only 'missing' thing is really hi-res images - Voyager 2 got no closer to Ganymede than about 60,000 km, corresponding to a resolution of 600 m/pixel.
Here is a new 4000x3800 pixel color mosaic of a large area around Osiris from Voyager 2 images: North is up and the color should be fairly accurate - possibly a bit too reddish and saturated but Ganymede's color from Voyager images is a complicated subject and I'm still working on it. This mosaic is composed of 21 clear filter images obtained by Voyager 2 at a range of 91,000 to 118,000 km (resolution 0.9 to 1.2 km/pixel). Its northern half has been colorized using a three frame color mosaic obtained at a range of a little over 300,000 km (resolution 3 km/pixel). The southern half (starting from just south of Osiris) has been colorized using a single wide angle color composite obtained when Voyager 2 was ~75,000 km from Ganymede (resolution ~5.6 km/pixel). Some of the lower resolution color coverage is included in the mosaic outside of the area covered by the higher-res clear filter images. I mosaicked everything in simple cylindrical projection and also did all of the color processing there and then rendered the resulting map using the viewing geometry Voyager 2 had when it obtained its best image of Osiris (image C2063759). Ganymede exhibits big albedo differences and this can complicate the image processing. I took great care not to overexpose/saturate any parts of the brightest terrain (Osiris in particular). This preserves every detail but makes the terminator area a bit dark. A huge variety of interesting terrain can be seen in the mosaic. With the benefit of hindsight I can safely say that there are clear hints of the extreme roughness of some terrain types covered by some of the higher resolution Galileo images but there is also terrain that looks smooth in the Voyager mosaic. I look forward to seeing Osiris in hi-res JUICE images and also the bright smooth-looking terrain around the bright crater SSW of Osiris. I'm going to end this with yet another version of a well known global Voyager 2 image. This version should be of slightly higher quality than my earlier versions of it. |
||
|
|||
Jun 9 2016, 07:01 PM
Post
#107
|
|
Lord Of The Uranian Rings Group: Members Posts: 798 Joined: 18-July 05 From: Plymouth, UK Member No.: 437 |
Stunning Bjorn! Can't believe this imagery came from a TV camera!
-------------------- |
|
|
Mar 6 2017, 03:42 AM
Post
#108
|
|
Senior Member Group: Members Posts: 2530 Joined: 20-April 05 Member No.: 321 |
That darker detail, so well centered on the disk, seems a bit like a processing artifact. Or your secondary mirror ;-) Extreme processing on images so small (compared to the theoretical resolution) can be tricky. The limb's contrast with the dark background can be enough to create a "doughnut" or ring effect. But if you can get more images and do a rotation movie, I'd be convinced ;-) This challenge sat in the back of my mind for 9 months, until Jupiter opposition came back around. I had good seeing three nights in a row last week, when Galileo Regio happened to rotate into and out of view My animation, paired with Solar System Simulator plots, is attached. These are images taken with my 150mm NexStar 6se and a broad blue filter, stacking 1500 frames. Images taken with a green filter look quite similar. Images taken with a red filter, however, do not show Galileo Regio. I've now noticed this on four different dates – one last year and three this year. After examining Cassini images of Ganymede, I find no reason for that in terms of Ganymede's actual color/terrain. Here's my conclusion: I have just enough resolution to capture Galileo Regio in shorter wavelengths. In red wavelengths (~40% worse diffraction-limited resolution), I can't capture it, so my color image shows Galileo Regio as red, which is a total artifact. Nevertheless, I feel assured now that I have imaged Galileo Regio, which pretty much maxes out the resolution I can hope for with my gear. |
|
|
Mar 6 2017, 08:59 PM
Post
#109
|
|
Member Group: Members Posts: 656 Joined: 20-April 05 From: League City, Texas Member No.: 285 |
...Nevertheless, I feel assured now that I have imaged Galileo Regio. Resolving Galileo Regio with an amateur scope is surprisingly feasible. Back in the mid-80s, on a dark West Texas night with amazing seeing, I resolved Ganymede as a disk with a 6" reflector with added Barlow lens (680X is popping into my head-- pretty ridiculous magnification) . I noticed a smudge on one portion of the disk, and sketched it, then later verified based upon Voyager maps and Ganymede's orientation that the smudge was Galileo Regio. Just about my single toughest observation. I've recently seen some rather amazing astrophotography of it with amateur scopes, but I haven't done anything serious myself since 1990. What you've shown here is quite persuasive. |
|
|
Oct 11 2021, 07:34 PM
Post
#110
|
|
Member Group: Members Posts: 127 Joined: 15-April 21 Member No.: 9009 |
(staff team, sorry if this may be considered necroposting)
is there any Callisto DEMs using the stereo imagery? I know there is stereo imagery bc of fig 5 in this short paper https://www.hou.usra.edu/meetings/lpsc2021/pdf/2228.pdf but i can't seem to find any Dem maps or dem chunks (i can use chunks to compile a global dem map with the available data like i did with triton's dem) |
|
|
Oct 11 2021, 08:22 PM
Post
#111
|
|
Senior Member Group: Members Posts: 1598 Joined: 14-October 05 From: Vermont Member No.: 530 |
The paper mentions it's 'PC DEM' where PC == photoclinometric == shape-from-shading.
|
|
|
Oct 11 2021, 09:05 PM
Post
#112
|
|
Member Group: Members Posts: 127 Joined: 15-April 21 Member No.: 9009 |
The paper mentions it's 'PC DEM' where PC == photoclinometric == shape-from-shading. PC DEM would also work too (used this kind of dem for Triton as that is what was available for Triton in the new Triton topography article) so is there any already made (in published PDF research papers) that i can get my hands on to compile a full texture mosaic |
|
|
May 12 2022, 03:18 AM
Post
#113
|
|
Member Group: Members Posts: 318 Joined: 1-October 06 Member No.: 1206 |
Incredibly interesting paper on the ArXiv regarding the existence of a giant impact palimpsest on Ganymede.
https://arxiv.org/ftp/arxiv/papers/2205/2205.05221.pdf Seems rather convincing! Confirmation to follow with JUICE and the Clipper. P |
|
|
May 13 2022, 05:48 PM
Post
#114
|
|
Newbie Group: Members Posts: 17 Joined: 23-July 15 From: Austin, TX Member No.: 7615 |
Here is Voyager 1's Ganymede approach -
Full video here, better quality - https://www.youtube.com/watch?v=q8fp5Tku1Dc Made with PyVoyager, which I am in the process of de-mothballing... I'm trying to get it ready so people can contribute manual alignments, if interested - https://github.com/bburns/PyVoyager. |
|
|
Lo-Fi Version | Time is now: 12th November 2024 - 10:19 PM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |