ROVER WHEELS: Monitoring changes over time, NOTE: Read back through the thread to avoid repeating misconceptions |
ROVER WHEELS: Monitoring changes over time, NOTE: Read back through the thread to avoid repeating misconceptions |
May 2 2015, 03:51 AM
Post
#271
|
||
Administrator Group: Admin Posts: 5172 Joined: 4-August 05 From: Pasadena, CA, USA, Earth Member No.: 454 |
Here's a look at the left-middle wheel over time, which is the one I'm most concerned about. Although there have been changes between sol 708 and 962, they're only incremental -- I'm actually pretty pleased with how they look after the Pahrump campaign and a whole lot of driving besides. There are no broken grousers. The grousers to watch closely are the ones between fields 11 and 12 and 13 -- those areas have a lot of tears running a substantial width of the wheel, leaving the grousers with little support except at their ends. So those are the ones that will probably break first, eventually. Hopefully continued careful driving will prevent that from happening for a while.
-------------------- My website - My Patreon - @elakdawalla on Twitter - Please support unmannedspaceflight.com by donating here.
|
|
|
||
Jun 8 2015, 04:27 PM
Post
#272
|
|
Administrator Group: Admin Posts: 5172 Joined: 4-August 05 From: Pasadena, CA, USA, Earth Member No.: 454 |
Moved a couple of posts about Mars 2020 wheel design to a new thread in the new Mars 2020 subforum.
-------------------- My website - My Patreon - @elakdawalla on Twitter - Please support unmannedspaceflight.com by donating here.
|
|
|
Oct 10 2015, 05:56 AM
Post
#273
|
|
Newbie Group: Members Posts: 15 Joined: 21-January 10 Member No.: 5183 |
The latest series of images from MSL / Mars Hand Lens Imager / MAHLI camera has several views of the wheels.
From Sol 1127 (40 img): http://mars.jpl.nasa.gov/msl/multimedia/ra...mp;camera=MAHLI One of the images shows a nasty looking spike of metal jutting into the wheel space. I presume the axle shaft will knock it away / back, before it becomes an issue for the wire bundle. I was unable to find a better image of the metal spike, but here's a ghastly, tweaked & cropped version (I presume it's a spike and not an optical illusion). From here: http://mars.jpl.nasa.gov/msl-raw-images/ms...794E01_DXXX.jpg |
|
|
Oct 12 2015, 03:44 PM
Post
#274
|
|
Administrator Group: Admin Posts: 5172 Joined: 4-August 05 From: Pasadena, CA, USA, Earth Member No.: 454 |
That one has been developing for a while, but it does have quite the inward point. Engineers are justifiably concerned about the possibility of these sharp edges abrading the wire bundles. I actually am having trouble figuring out a scenario in which this one, ripping further, would then straighten in the right way and place to actually scrape a wire bundle; I think it gets to be a more serious problem if (when) grousers start breaking.
-------------------- My website - My Patreon - @elakdawalla on Twitter - Please support unmannedspaceflight.com by donating here.
|
|
|
Oct 13 2015, 10:29 AM
Post
#275
|
|
Newbie Group: Members Posts: 15 Joined: 21-January 10 Member No.: 5183 |
Yes, you're right - when it (or any others) get long enough, they will hit and be bent in/out/forward/aft - but certainly away from the centre of the wheel - which is a very good thing.
That one has been developing for a while, but it does have quite the inward point. Engineers are justifiably concerned about the possibility of these sharp edges abrading the wire bundles. I actually am having trouble figuring out a scenario in which this one, ripping further, would then straighten in the right way and place to actually scrape a wire bundle; I think it gets to be a more serious problem if (when) grousers start breaking.
|
|
|
Jun 30 2016, 06:01 AM
Post
#276
|
|
Junior Member Group: Members Posts: 22 Joined: 10-August 12 From: Australia Member No.: 6530 |
Been pretty quiet on here: any developments in 'Wheel World'?!
Dean |
|
|
Jun 30 2016, 11:49 AM
Post
#277
|
|
Senior Member Group: Members Posts: 2346 Joined: 7-December 12 Member No.: 6780 |
The driving software update appears to have slowed down the wheel degradation. There has been less driving and more science activity. And there haven't been again these sharp and strongly embedded rocks, which caused much of the damage.
I'm not really disappointed about Curiosity being fit for the trip uphill Mt. Sharp. |
|
|
Jun 30 2016, 09:27 PM
Post
#278
|
|
Member Group: Members Posts: 866 Joined: 15-March 05 From: Santa Cruz, CA Member No.: 196 |
|
|
|
Jul 1 2016, 04:45 PM
Post
#279
|
|
Administrator Group: Admin Posts: 5172 Joined: 4-August 05 From: Pasadena, CA, USA, Earth Member No.: 454 |
I included this comparison in my most recent update. Degradation has progressed, but only slowly, and there was no acceleration as they went across the Naukluft plateau, as I'd feared. As long as drive distances are relatively short (less than 50 m or so), the rover drivers can prevent a lot of damage by driving around hazards they can see. Not sure how much longer the grousers on the right middle wheel are going to last, but they're hanging on for now.
Full wheel survey sol 1315: LM wheel over time: -------------------- My website - My Patreon - @elakdawalla on Twitter - Please support unmannedspaceflight.com by donating here.
|
|
|
Nov 7 2016, 09:58 PM
Post
#280
|
||
Senior Member Group: Members Posts: 4259 Joined: 17-January 05 Member No.: 152 |
I thought something looked a bit odd about the LM wheel on the latest survey, from 1512. Comparing it to an earlier view, from 708, you can pretty clearly see that the grousers near the top have been bent inwards:
They've bent where the skin in between is quite heavily damaged, so I guess it makes sense that this is a weaker point. I haven't checked carefully to see how far back this bending occured, but judging from Emily's LM compilation it seems to show up at around sol 1315. (Mods - oops, sorry, I forgot about the pinned wheel thread.) [MOVED - MOD.] |
|
|
||
Nov 7 2016, 10:20 PM
Post
#281
|
|
Administrator Group: Admin Posts: 5172 Joined: 4-August 05 From: Pasadena, CA, USA, Earth Member No.: 454 |
Oof. Well spotted. I won't have time to look back in time for a bit, but if people want to hunt for where/when this happened, there have been full wheel surveys on 1046, 1127, 1179, 1260/9, 1315, 1434, and 1471. There have also been partial (one position only) surveys on 1182, 1214, 1245, 1287, 1313, 1355, 1380, 1403, 1416, 1435, 1444, 1459, and 1482.
-------------------- My website - My Patreon - @elakdawalla on Twitter - Please support unmannedspaceflight.com by donating here.
|
|
|
Nov 13 2016, 11:17 AM
Post
#282
|
|
Newbie Group: Members Posts: 15 Joined: 21-January 10 Member No.: 5183 |
With thanks to Post #278 from atomoid, above, I found their mentioned link to the site http://www.midnightplanets.com/web/MSL/sols.html
I've always found the MSL Raw image site to be quite cumbersome to use - one has to open each day, from each camera, to see what imagery was taken, and then open each thumbnail to get the final image. The midnightplanets site is a much better interface and shows all images in a neat grid array (though I'm sure, bandwidth heavy). I presume it's a bit of clever coding - a front end image scraper for the main msl site. It's very good, and, after all these years, I've only just stumbled across it. Here are the links to the useful MAHLI (and others) images for full wheel surveys days (thanks to E Lakdawalla for pointing them out). 1046 1127 1179 1260 1269 1315 1434 1471 The partial surveys are here: 1182 1214 1245 1287 1313 1355 1380 1403 1416 1435 1444 1459 1482 The area dented inwards appears to be section 12/13/14. |
|
|
Mar 21 2017, 10:16 PM
Post
#283
|
|
Newbie Group: Members Posts: 15 Joined: 21-January 10 Member No.: 5183 |
And now the first broken grouser, seems to be between 12-13 (as predicted in Post #271!)
https://mars.nasa.gov/news/2017/breaks-obse...er-wheel-treads https://mars.jpl.nasa.gov/multimedia/images...curiosity-wheel Images here. https://mars.nasa.gov/msl/multimedia/raw/?s...mp;camera=MAHLI This is a very interesting event. |
|
|
Mar 22 2017, 01:59 AM
Post
#284
|
||
Member Group: Members Posts: 866 Joined: 15-March 05 From: Santa Cruz, CA Member No.: 196 |
A different view of the two broken grousers: one looks somewhat pushed into the wheel and is slightly severed just outside the hole to the right. Below it a second grouser is severed and displaced quite a bit and is probably the one sticking up in the original image. These are also visible lower down in the next wheel roll image and looks about right to put the lower one in the right place to peek up over the top in the original linked image. its sort of grimly funny how the middle wheels take the brunt of the damage, more load-bearing perhaps..
|
|
|
||
Jun 30 2017, 08:08 PM
Post
#285
|
|
Senior Member Group: Members Posts: 1887 Joined: 20-November 04 From: Iowa Member No.: 110 |
An Algorithm Helps Protect Mars Curiosity's Wheels
QUOTE There are no mechanics on Mars, so the next best thing for NASA's Curiosity rover is careful driving. A new algorithm is helping the rover do just that. The software, referred to as traction control, adjusts the speed of Curiosity's wheels depending on the rocks it's climbing. On level ground, all of the rover's wheels turn at the same speed. But when a wheel goes over uneven terrain, the incline causes the wheels behind or in front of it to start slipping. This change in traction is especially problematic when going over pointed, embedded rocks. When this happens, the wheels in front pull the trailing wheels into rocks; the wheels behind push the leading wheels into rocks. In either case, the climbing wheel can end up experiencing higher forces, leading to cracks and punctures. The treads on each of Curiosity's six wheels, called grousers, are designed for climbing rocks. But the spaces between them are more at risk. The traction control algorithm uses real-time data to adjust each wheel's speed, reducing pressure from the rocks. The software measures changes to the suspension system to figure out the contact points of each wheel. Then, it calculates the correct speed to avoid slippage, improving the rover's traction. Traction control also addresses the problem of wheelies. Occasionally, a climbing wheel will keep rising, lifting off the actual surface of a rock until it's free-spinning. That increases the forces on the wheels that are still in contact with terrain. When the algorithm detects a wheelie, it adjusts the speeds of the other wheels until the rising wheel is back into contact with the ground. https://www.jpl.nasa.gov/news/news.php?feature=6887 |
|
|
Lo-Fi Version | Time is now: 19th October 2024 - 06:19 PM |
RULES AND GUIDELINES Please read the Forum Rules and Guidelines before posting. IMAGE COPYRIGHT |
OPINIONS AND MODERATION Opinions expressed on UnmannedSpaceflight.com are those of the individual posters and do not necessarily reflect the opinions of UnmannedSpaceflight.com or The Planetary Society. The all-volunteer UnmannedSpaceflight.com moderation team is wholly independent of The Planetary Society. The Planetary Society has no influence over decisions made by the UnmannedSpaceflight.com moderators. |
SUPPORT THE FORUM Unmannedspaceflight.com is funded by the Planetary Society. Please consider supporting our work and many other projects by donating to the Society or becoming a member. |